Ready Rig GS Stabilizer + ProArm Kit with Case

    Rates
  • Daily$30.00
  • Weekly $90.00
  • Weekend $45.00

For longer periods,please contact us at rentals@fusioncine.com

Rental Rules & Information

Rental Rate Day Charge Schedule

  • 1 Day Rental = 1 Day Charge
  • 1 to 3 Day Rental = Charge for each day (3 Day Charge)
  • 3 to 7 Day Rental = 3 Day Charge
  • Weekend (Saturday / Sunday) = 1.5 Day Charge
  • Month Rental (28 Days) = 10 Day Charge

Equipment Pick Up and Drop Off Times

Equipment pick up – Equipment will be ready the day before the rental date between 4pm and 6pm (Monday to Friday) or at the time of opening the day of the rental (8am)

Equipment Return – Equipment must be returned between 8am and 10am the day following the rental date (Monday to Friday) or the Monday following a weekend.

If pick up or drop off times are outside of these hours them additional charges may apply.

Insurance- All equipment rentals require a Certificate of Insurance or Deposit before any item can leave Fusion Cine. Get covered using our Fusion Cine Insurance Program

Please note that we rent equipment across Canada, but currently only facilitate rentals out of our Vancouver location, so rentals outside of this area may require additional shipping time.

Total Cost per day: $

The MOVI M10 3-Axis Motorized Gimbal Stabilizer from Freefly is a camera stabilization system that uses three motors and an IMU (inertial measurement unit) to detect and counteract unwanted movement along three axes: pan, tilt, and roll. In particular, it works to compensate for handshake or vehicle-induced vibration as well as reduce translation. It is designed for DSLRs and smaller cinema cameras and can accommodate cameras weighing up to 12 pounds. There is a quick-release adapter available separately so that it can be mounted on cranes, jibs, vehicles mounts, and other camera support equipment. There is also an MR (multi-rotor) version, the MOVI MR, for mounting a camera on a UAV. You can also add the MR conversion kit, available separately, later on to convert the M10 for use on a UAV.

Load Range 1-40 lb (0.45-18 kg)
Telescoping Arm 23-27" (58-69 cm)
Accessory Mount Thread 1/4"-20, 3/8"-16
Boom Range 55" (140 cm)
Belt Size 28-44" (71-112 cm)
Weight 14 lb (6.4 kg)

Write Your Own Review
You're reviewing:Ready Rig GS Stabilizer + ProArm Kit with Case
Your Rating