Shark Slider S1
- Weekly $225.00
- Weekend $112.50
For longer periods,please contact us at firstname.lastname@example.org
Rental Rate Day Charge Schedule
- 1 Day Rental = 1 Day Charge
- 1 to 3 Day Rental = Charge for each day (3 Day Charge)
- 3 to 7 Day Rental = 3 Day Charge
- Weekend (Saturday / Sunday) = 1.5 Day Charge
- Month Rental (28 Days) = 10 Day Charge
Equipment Pick Up and Drop Off Times
Equipment pick up – Equipment will be ready the day before the rental date between 4pm and 6pm (Monday to Friday) or at the time of opening the day of the rental (8am)
Equipment Return – Equipment must be returned between 8am and 10am the day following the rental date (Monday to Friday) or the Monday following a weekend.
If pick up or drop off times are outside of these hours them additional charges may apply.
Insurance- All equipment rentals require a Certificate of Insurance or Deposit before any item can leave Fusion Cine. Get covered using our Fusion Cine Insurance Program
The Shark Slider S1 is a modular slider supporting up to 15 lb loads (11 lb with extension rails) and offering smooth movement thanks to silent bearings, synchronous belts, and a flywheel that adds inertia.
The flywheel adds a damping effect to your slides, ensuring smooth acceleration/deceleration as opposed to jerky starts and stops. It achieves this through its centrifugal force while the slider belt is connected to it.
The S1 can be completely taken apart with just one included hex wrench and the different components packed separately, if you want. The end pieces offer adjustable feet that spread out in triangular form to add extra stability. The mounting plate attached on the bottom of the sliding carriage is also designed with stability in mind and is screwed into the carriage at four corners to minimize vibration when the slider is mounted on a tripod. The S1 offer has a 3/8"-16 camera mounting screw, and 1/4"-20 and 3/8"-16 tripod mount threaded holes.
- 31" Shark Slider S1
- Extra Extension Rails & Long Drive Belt
- 25" Standard Sliding Length; 47" Total
- 11 lb Payload (15 lb without Extension)
- Flywheel for Smooth Tracking Shots
- 1/4"-20 and 3/8"-16 Tripod Mount Holes
- Carbon Fiber and Aluminum Construction
- Includes Padded Carrying Bag
- Simple, Single-Tool Assembly
|Load Capacity||Without Extensions: 15 lb (7 kg)
With Extensions: 11 lb (5 kg)
End to End Length: 31" (79 cm)
Sliding Length: 25" (64 cm)
End to End Length: 53" (135 cm)
Sliding Length: 47" (120 cm)
|Mount Types||3/8"-16 camera mount screw
1/4"-20 and 3/8"-16 tripod mount threaded holes
|Material||Rails: Carbon fiber
Other: Anodized aluminum
|Rod Diameter||0.8" (22 mm)|
|Weight||8.3 lb (3.8 kg)|
- iFootage Carbon Fiber Shark Slider S1