Matthews Dutti Dolly Starter Kit (Aluminum)
- Weekly $225.00
- Weekend $112.50
For longer periods,please contact us at firstname.lastname@example.org
Rental Rate Day Charge Schedule
- 1 Day Rental = 1 Day Charge
- 1 to 3 Day Rental = Charge for each day (3 Day Charge)
- 3 to 7 Day Rental = 3 Day Charge
- Weekend (Saturday / Sunday) = 1.5 Day Charge
- Month Rental (28 Days) = 10 Day Charge
Equipment Pick Up and Drop Off Times
Equipment pick up – Equipment will be ready the day before the rental date between 4pm and 6pm (Monday to Friday) or at the time of opening the day of the rental (8am)
Equipment Return – Equipment must be returned between 8am and 10am the day following the rental date (Monday to Friday) or the Monday following a weekend.
If pick up or drop off times are outside of these hours them additional charges may apply.
Insurance- All equipment rentals require a Certificate of Insurance or Deposit before any item can leave Fusion Cine. Get covered using our Fusion Cine Insurance Program
Please note that we rent equipment across Canada, but currently only facilitate rentals out of our Vancouver location, so rentals outside of this area may require additional shipping time.
The Matthews Dutti Dolly Starter Kit is machined from 6061 T-6 aluminum, weighs only 35 pounds yet supports 800 pounds, and features an integrated Mitchell plate.
Eight inline skate wheels allow the dolly to roll over a smooth flat surface or glide on straight track. The dolly features a platform height under 2" above the surface or track, and the Mitchell mounting plate is machined into the platform, allowing you to mount your head directly to the platform for extreme low-angle dolly shots.
The half-inch thick aluminum platform and wide spaced wheels create a stable platform from which to shoot from.
Fourteen 3/8'-16 threaded mounting holes enable securing mounting optional accessories such as a camera bazooka, elevator, or even a dolly seat. Optional accessory wings allow you to fit a tripod with a 30" or smaller diameter footprint on the Dutti Dolly. Slots machined into the front and back of the platform make it easy to carry. Included with the Dutti Dolly are a 75mm bowl adapter and a Mitchell riser kit.
|Material of Construction||Machined, type 2 hard anodized 6061 T-6 aluminum|
|Load Capacity||800.0 lb / 362.9 kg|
|Mounting||Head Mount: Mitchell
Threaded Mounting Holes: 14 x 3/8"-16
|Wheels||8 x Inline skate|
|Dimensions||General: 20 x 24 x 3.5" / 50.8 x 60.96 x 8.89 cm (to top of wheel guards)
Platform Height: 1.75" / 4.45 cm
|Weight||35 lb / 15.9 kg|
- Matthews Dutti Dolly Starter Kit (Aluminum)
- Mitchell Mount to 75mm Bowl Adapter
- Mitchell Riser Kit for Dutti Dolly