OConnor O-Grips Deluxe Set

Sony E-mount lenses


  • Daily$35.00
  • Weekly $105.00
  • Weekend $52.50

For longer periods,please contact us at rentals@fusioncine.com

Rental Rules & Information

Rental Rate Day Charge Schedule

  • 1 Day Rental = 1 Day Charge
  • 1 to 3 Day Rental = Charge for each day (3 Day Charge)
  • 3 to 7 Day Rental = 3 Day Charge
  • Weekend (Saturday / Sunday) = 1.5 Day Charge
  • Month Rental (28 Days) = 10 Day Charge

Equipment Pick Up and Drop Off Times

Equipment pick up – Equipment will be ready the day before the rental date between 4pm and 6pm (Monday to Friday) or at the time of opening the day of the rental (8am)

Equipment Return – Equipment must be returned between 8am and 10am the day following the rental date (Monday to Friday) or the Monday following a weekend.

If pick up or drop off times are outside of these hours them additional charges may apply.

Insurance- All equipment rentals require a Certificate of Insurance or Deposit before any item can leave Fusion Cine. Get covered using our Fusion Cine Insurance Program

Please note that we rent equipment across Canada, but currently only facilitate rentals out of our Vancouver location, so rentals outside of this area may require additional shipping time.

Total Cost per day: $

The OConnor O-Grips Deluxe Set is a camera support kit that features four OConnor O-Grip Modules, the O-Grips Rod Bridge, two Arri rosette adapters and a start/stop switch module. Each O-Grip module can support up to 44 pounds, and is made from a titanium core with stainless steel 3/8"-16 top screw and bottom thread. The top screw articulates 90°, and the O-Grip can rotate around the top screw in a half sphere. You secure the top screw by using a 5mm Allen wrench, and then you can set the O-Grip's position with one hand.

The O-Grip modules screw into each other, allowing you to stack them and lock them into a comfortable position. The deluxe set includes the O-Grips Rod Bridge that clamps onto 19mm rod supports and both 15mm Studio and LWS rod systems. The Rod Bridge has three threaded holes, two on the side, and one in the middle, which allows you to attach three O-Grips directly to the Rod Bridge for a variety of hand grip positions. You can connect an O-Grip to a camera (or any device) with an Arri style rosette by using the included adapters, and there are two adapters included. The O-Switch module is made specifically to fit on an O-Grip, features a 4-pin Lemo connector and facilitates remote start/stop functionality.


  • Four Single Handle Ball Joint Grips
  • Each Hand Grip Supports up to 44 Pounds
  • Stainless Steel with Titanium Core
  • 3/8-16 Male & Female End
  • One Handed Adjustment Once Attached
  • Grips Modules are Stackable
  • Rod Bridge for 19mm & 15mm Rods
  • Two Adapters to Arri Style Rosettes
  • Camera Start/Stop Module
O-Grips Double Jointed Set
Playload 44 lbs (20kg)
O-Grips Start/Stop Switch Module 
Material of Construction Aluminum
Attachment Clamps onto OConnor O-Grip
Secured by M4 cap screw that takes a 3 mm Allen key (not included)
Connector 1 x 4-pin female Lemo
On/Off Push Button Push Button
Dimensions Clamping Diameter: 1.18" (30 mm)

What's Included

  • O-Grips Double Jointed Set
  • 2 x Rosette Adapter 60-Tooth Arri Compatible
  • O-Grips Start/Stop Switch Module

Write Your Own Review
You're reviewing:OConnor O-Grips Deluxe Set
Your Rating