Glidecam HD-4000 with X-10 Arm and Vest

    Rates
  • Daily$150.00
  • Weekly $450.00
  • Weekend $225.00

For longer periods,please contact us at rentals@fusioncine.com

Rental Rules & Information

Rental Rate Day Charge Schedule

  • 1 Day Rental = 1 Day Charge
  • 1 to 3 Day Rental = Charge for each day (3 Day Charge)
  • 3 to 7 Day Rental = 3 Day Charge
  • Weekend (Saturday / Sunday) = 1.5 Day Charge
  • Month Rental (28 Days) = 10 Day Charge

Equipment Pick Up and Drop Off Times

Equipment pick up – Equipment will be ready the day before the rental date between 4pm and 6pm (Monday to Friday) or at the time of opening the day of the rental (8am)

Equipment Return – Equipment must be returned between 8am and 10am the day following the rental date (Monday to Friday) or the Monday following a weekend.

If pick up or drop off times are outside of these hours them additional charges may apply.

Insurance- All equipment rentals require a Certificate of Insurance or Deposit before any item can leave Fusion Cine. Get covered using our Fusion Cine Insurance Program

Please note that we rent equipment across Canada, but currently only facilitate rentals out of our Vancouver location, so rentals outside of this area may require additional shipping time.

Total Cost per day: $

The Glidecam HD4000 is a lightweight, hand-held camcorder stabilizing system. This system is upgraded from the 4000 Pro and offers fine adjustments and an improved gimbal and balance system.

Camera stabilization systems like this one work to provide camera stability during movement for dynamic and subjective camera shots. It utilizes a balancing system that dampens the user's body movement, providing a smooth, floating moving image appearance usually achieved with more expensive equipment.

The GLIDECAM X-10 is a highly advanced, professional Body-Mounted Camera Stabilization System designed to be used with specific Glidecam Hand-held Camera Stabilizers**. The GLIDECAM X-10 system will allow you to walk, run, go up and down stairs, shoot from moving vehicles and travel over uneven terrain without any camera instability or shake.

The GLIDECAM X-10 is very similar in design to the Glidecam Smooth Shooter; however the X-10 comes with both sections of its support arm being able to move vertically, whereas the Smooth Shooter comes with only the front section of its support arm being able to move vertically. Also, the X-10 comes with a trimmable Arm-to-Vest Connector, whereas the Smooth Shooter’s Arm-to-Vest Connector is not trimmable.

The GLIDECAM X-10 system works by isolating your body's motion from your camera, while your camera is balanced in a relatively motionless and isolated state. The GLIDECAM X-10'S Support Arm can be boomed up and down, as well as pivoted in and out, and side-to-side. It is the combined booming and pivoting action of the Support Arm that isolates your motions from the camera in a way that creates smooth camera footage.

The GLIDECAM X-10 does not come with a Glidecam Hand-held Camera Stabilizer**; however, it is specifically designed to be used with them. If you already own one of our hand-held stabilizers, then you will be able to use it by simply attaching it to the end of the GLIDECAM X-10's Support Arm. None of our Glidecam Hand-held Camera Stabilizers** need to be modified to work with the GLIDECAM X-10. You can use your camcorder's flip out LCD monitor, or a monitor that is attached to the base of your Glidecam Hand-held Camera Stabilizer**. This allows for remote viewing of the camera's image without disturbing the orientation of the system.

When using the Glidecam Hand-held Camera Stabilizers** in hand-held mode, it is your arm that carries all of the weight. However, when the Glidecam Hand-held Camera Stabilizers** are used with the GLIDECAM X-10, it is the GLIDECAM X-10's Spring-loaded Support Arms that carry all of the weight. Because of this, you will now be able to shoot for extended periods of time, whereas before, the stress associated with hand-holding the weight reduced your shooting time.

The GLIDECAM X-10 is a highly developed and meticulously engineered camera stabilization system. Its ability to shoot smooth imagery within its weight range is extraordinary. It out performs all of the competition in its class, yet remains truly economical. The GLIDECAM X-10 is the realization of the need to stabilize lightweight cameras using the same degree of sophistication employed to stabilize heavy cameras. With the GLIDECAM X-10 you will be able to acquire the type of smooth footage you've always dreamed of.

Glidecam HD4000
Construction Aluminum
Load Capacity 4.0-10.0 lbs (1.8-4.5kg)
Vest Optional Body-Pod
Arm Optional Forearm Support Brace
Head Assembly/Top Stage Adjustable
X,Y Head Dimensions: 8.750 x 5.00 x 1.00"
Quick Release Yes and Camera Plate has 1/4-20 and 3/8" Mounting
Docking Bracket No
Dovetail Plate Base Platform
13.75 x 4.75"-18.25 x 4.75"
Gimbal Free floating, precision Gimbal
Dynamic Spin 360-degree panning and tilting
Post Telescoping
Central Support Post: 1.00" diameter
20 to 28"
Monitor No (optional monitor could be mounted on Base)
Battery No
Battery Mount No
Weight 3.3 lbs (1.5kg)
Glidecam X-10 Dual Support
Weight Dual Support Arm
5.75 lbs
2.6 kg

Individual Weight Plates
12.9 oz
366 g
Range Boom Range 30"

 

Write Your Own Review
You're reviewing:Glidecam HD-4000 with X-10 Arm and Vest
Your Rating