Chrosziel Zoom Servo Drive CDM-LWZ3-Z for the Zeiss LWZ.3 21-100mm lens
- Weekly $75.00
- Weekend $150.00
For longer periods,please contact us at email@example.com
Rental Rate Day Charge Schedule
- 1 Day Rental = 1 Day Charge
- 1 to 3 Day Rental = Charge for each day (3 Day Charge)
- 3 to 7 Day Rental = 3 Day Charge
- Weekend (Saturday / Sunday) = 1.5 Day Charge
- Month Rental (28 Days) = 10 Day Charge
Equipment Pick Up and Drop Off Times
Equipment pick up – Equipment will be ready the day before the rental date between 4pm and 6pm (Monday to Friday) or at the time of opening the day of the rental (8am)
Equipment Return – Equipment must be returned between 8am and 10am the day following the rental date (Monday to Friday) or the Monday following a weekend.
If pick up or drop off times are outside of these hours them additional charges may apply.
Insurance- All equipment rentals require a Certificate of Insurance or Deposit before any item can leave Fusion Cine. Get covered using our Fusion Cine Insurance Program
Please note that we rent equipment across Canada, but currently only facilitate rentals out of our Vancouver location, so rentals outside of this area may require additional shipping time.
The Chrosziel Zoom Servo Drive CDM-LWZ3-Z for the Zeiss LWZ.3 21-100mm lens contains one digital servo motor, the gear and a PCB with CPU in one single housing.
The mounting of the Zoom Servo Drive makes the operator's workflow comfortable. Just three captive screws are needed to mount it onto the Zeiss Lightweight Zoom (LWZ.3). Controlled via Sony smart grip or any other LANC hand grip Until today, zoom servo drives were operated either by the inbuilt zoom rocker or external zoom devices.
A second handgrip controls the camera settings or user commands. Both units are separated from each other and cannot be operated by one single hand. With the CDM-LWZ3-Z Chrosziel was able to unify both functionalities into one single unit. Supported are the smart grips of the Sony PXW-FS5 and Sony PXW-FS7 or any LANC compatible zoom rocker. For operation, the power cable is connected and the two Jack cables with the handgrip and the camera. Once powered the zoom servo drive calibrates automatically the end stops of the lens. To further support the operator's piece of mind Chrosziel implemented.
- Servo drive unit mounted to lens
- Four zoom modes
- Controlled by LANC equipment
Single unit mounted onto lens
Two captive screws keeping the single servo drive unit permanently fixed onto lens.
Controlled via SONY FS & LANC handgrip
The Sony FS5 / FS7 handgrip zoom rocker controls directly the servo drive unit. Other zoom rockers with LANC protocol are compatible too, e.g. mounted to handgrip.
Camera control signals forwarded
Control commands are immediately looped through to the camera (e.g. menu / user buttons / focus magnification/ camera run & stop).
|Dimensions (W x H x D)||2.56/3.11" x 2.87/3.31" x 1.38" 65/79 x 73/84 x 35mm|
|Weight||0.34lbs. (156gram) with 3 screws|
|0.46lbs. (210gram) with 3 screws, 1x D-Tap and 2x Jack Cables|
|Cable length||D-Tap Power cable (23.62"/ 600mm),|
|Jack-Jack cable (9.84"/ 250mm),|
|Jack Extension cable (11.81“/ 300mm)|
|Ports & connectors||1x LEMO 0B 5-Pin Power socket, 2x 2,5mm|
|Jack Control socket, 1x USB type mini A-B|
|Compatibility||Fujinon XK6x20 20-120mm / T3.5 and lenses identical in construction|
|Power consumption||Max. ca. 350 mAh @ 12 V|
- 1x Zoom Servo Drive
- 1x D-Tap power cable
- 1x 2.5 mm Jack-Jack Cable
- 1x 2.5 mm Jack Extension Cable
- 3x Captive mounting Screws
- 1x 2.5 mm Allen Key
- 1x Mini-USB-Adapter (MiniUSB to USB)