Teradek Bolt Professional Wireless HD-SDI Video Transmitter/2xReceiver Set
- Weekly $450.00
- Weekend $225.00
For longer periods,please contact us at firstname.lastname@example.org
Rental Rate Day Charge Schedule
- 1 Day Rental = 1 Day Charge
- 1 to 3 Day Rental = Charge for each day (3 Day Charge)
- 3 to 7 Day Rental = 3 Day Charge
- Weekend (Saturday / Sunday) = 1.5 Day Charge
- Month Rental (28 Days) = 10 Day Charge
Equipment Pick Up and Drop Off Times
Equipment pick up – Equipment will be ready the day before the rental date between 4pm and 6pm (Monday to Friday) or at the time of opening the day of the rental (8am)
Equipment Return – Equipment must be returned between 8am and 10am the day following the rental date (Monday to Friday) or the Monday following a weekend.
If pick up or drop off times are outside of these hours them additional charges may apply.
Insurance- All equipment rentals require a Certificate of Insurance or Deposit before any item can leave Fusion Cine. Get covered using our Fusion Cine Insurance Program
1 TX to Multiple RX
One of the best features of the Bolt Pro system is its ability to transmit full 1080p60 video to 4 receivers simultaneously. Multicast enabled Bolt Pro systems allow you to mix and match HDMI and 3G-SDI receivers, which means you can connect them to anything from professional field monitors to Teradek Cube encoders.
Bolt transmits uncompressed video using WSDI Pro™, which provides a wireless range of up to 300ft and can coexist with other wireless equipment by dynamically adjusting the frequency bands used in real time. For optimal performance in challenging RF environments, Bolt systems can utilize Dynamic Frequency Selection (DFS) to avoid interference.
Rugged and Low Power
Bolt transmitters are housed in a 7oz milled aluminum chassis with six 1/4"-20 mounting holes. The receiver is enclosed in a durable ABS plastic shell. The transmitter requires approximately 4W of power, while the receiver consumes only 6W. To power these units for long periods of time, Bolt ships with a Lemo to P-tap cable that can be used to connect with external power sources such as V-mount or AB Gold-mount batteries. Additionally, Bolt Pro's internal Li-Ion battery provides up to 60 minutes of run time and can be charged via its micro USB port or its Lemo DC input.
Bolt Meets Cube
Connecting a Cube encoder to Bolt's 3G-SDI loop or receiver output can result in powerful new workflows. This feature lets you to take advantage of Bolt's latency-free monitoring capabilities, while simultaneously sending Cube's compressed video feed to an iOS device, directly to the Web, or to a decoder located offsite. The best part is that Cube and Bolt do not interfere with one another so video dropouts will never be a problem.
|Connections||1x SD/HD/3G-SDI or HDMI Input
1x looping 3G-SDI output
|Resolutions||Up to 1080p60|
|Wireless Range||Up to 300 ft|
|Power||Low Power: ~4.5 W
Lemo 6 - 16 V DC Input
Rechargeable lithium-ion battery with 70 minute run time
Chargeable over mini USB port or DC input
|Mount Type||1/4"-20 holes|
|Operating Temperature||32 to 122°F (0 to 50°C)|
|Dimensions||2.3 x 4.3" (5.8 x 11 cm)|
|Weight:||.4 lb (.2 kg)|
|Connections||2x SD/HD/3G-SDI outputs|
|Resolutions||Up to 1080p60|
|Power||Low power: ~6 W
Lemo 6-28 V DC Input
|Chassis||Durable ABS plastic|
|Mount Type||1/4"-20 through-hole|
|Dimensions||2.95 x 4.3" (7.5 x 11 cm)|