Teradek Bolt Pro 2000 TX/RX SDI/HDMI Wireless Video Transceiver Set

Sony E-mount lenses


  • Daily$350.00
  • Weekly $1,050.00
  • Weekend $525.00

For longer periods,please contact us at rentals@fusioncine.com

Rental Rules & Information

Rental Rate Day Charge Schedule

  • 1 Day Rental = 1 Day Charge
  • 1 to 3 Day Rental = Charge for each day (3 Day Charge)
  • 3 to 7 Day Rental = 3 Day Charge
  • Weekend (Saturday / Sunday) = 1.5 Day Charge
  • Month Rental (28 Days) = 10 Day Charge

Equipment Pick Up and Drop Off Times

Equipment pick up – Equipment will be ready the day before the rental date between 4pm and 6pm (Monday to Friday) or at the time of opening the day of the rental (8am)

Equipment Return – Equipment must be returned between 8am and 10am the day following the rental date (Monday to Friday) or the Monday following a weekend.

If pick up or drop off times are outside of these hours them additional charges may apply.

Insurance- All equipment rentals require a Certificate of Insurance or Deposit before any item can leave Fusion Cine. Get covered using our Fusion Cine Insurance Program

Please note that we rent equipment across Canada, but currently only facilitate rentals out of our Vancouver location, so rentals outside of this area may require additional shipping time.

Total Cost per day: $

The Teradek Bolt Pro 2000 TX/RX SDI/HDMI Wireless Video Transceiver Set is a latency-free wireless transmission system that sends 4:2:2, 1080p60 video at up to two thousand feet. This Bolt Pro 2000 system comes in a set of 1 transmitter and 1 receiver. The transmitter features a loop through SD/HD/3G-SDI output, so you can transmit video and send the output from the camera to a monitor or deck. It features 4-LED indicator lights that indicate battery level.

The Bolt Pro 2000 system is suitable for exterior and interior shoots, and it features Dynamic Frequency Selection that allows it adjust the frequency bands it is using in real time to avoid interference. This Bolt Pro 2000 comes with 1 receiver that features 2 x SD/HD/3G-SDI outputs and an AC power adapter. V-Mount or Anton Bauer type battery plates are available.

The Bolt transmits uncompressed video using WSDI Pro, which provides a wireless range of up to 2,000' (609.6 m) and can co-exist with other wireless equipment by dynamically adjusting the frequency bands used in real time.

LED Indicators
The transmitter and receiver each feature LED indicators for Video signal and Link. The receiver features Video, Link, and Ready LED indicators.

Rugged & Low Power
Bolt Pro transmitters and receivers are housed in a milled aluminum chassis. The transmitter requires approximately 7W of power, while the receiver consumes only 6W. To power these units for long periods of time, a Lemo to P-tap cable (included) can be used to connect with available external power sources such as V-mount or AB Gold-mount batteries.

Input SD/HD/3G-SDI
Output Looping 3G-SDI
Resolution Up to 1080p60
Frequency 5.1 to 5.8 GHz
Wireless Range 2000' (609.6 m)
Power 7 W
Cable Lemo 6 to 28 VDC input (Pin 1 GND, Pin 2 +DC, 0B 302 series Lemo)
Encryption AES128
Audio 2-channel
Chassis Milled aluminum
Mounting Multiple mounting options with 1/4"-20 holes
Mount Accessory shoe mount
Temperature 32 to 122°F (0 to 50°C)
Dimensions 4.3 x 2.6 x 1.0" (10.9 x 6.6 x 2.54 cm)
Weight 8.8 oz (249 g)
Output 2 x SD/HD/3G-SDI
Resolution Up to 1080p60
Power 6 W
Cable Lemo 6 to 28VDC
Mounting Lemo 6 to 28VDC
Dimensions 6.0 x 4.6 x 1.0" (15.2 x 11.7 x 2.54 cm)
Weight 1.05 lb (476 g)

What's Included

  • Transmitter
  • Receiver
  • P-Tap to Lemo Power Cable
  • AC Power Adapter
  • SDI Cable
  • Thumb Screw
  • Shoe Mount
  • Light Stand Mount
  • Pelican Case

Write Your Own Review
You're reviewing:Teradek Bolt Pro 2000 TX/RX SDI/HDMI Wireless Video Transceiver Set
Your Rating