Light & Motion Stella Pro 125 RF Kit
- Weekly $300.00
- Weekend $150.00
For longer periods,please contact us at firstname.lastname@example.org
Rental Rate Day Charge Schedule
- 1 Day Rental = 1 Day Charge
- 1 to 3 Day Rental = Charge for each day (3 Day Charge)
- 3 to 7 Day Rental = 3 Day Charge
- Weekend (Saturday / Sunday) = 1.5 Day Charge
- Month Rental (28 Days) = 10 Day Charge
Equipment Pick Up and Drop Off Times
Equipment pick up – Equipment will be ready the day before the rental date between 4pm and 6pm (Monday to Friday) or at the time of opening the day of the rental (8am)
Equipment Return – Equipment must be returned between 8am and 10am the day following the rental date (Monday to Friday) or the Monday following a weekend.
If pick up or drop off times are outside of these hours them additional charges may apply.
Insurance- All equipment rentals require a Certificate of Insurance or Deposit before any item can leave Fusion Cine. Get covered using our Fusion Cine Insurance Program
Please note that we rent equipment across Canada, but currently only facilitate rentals out of our Vancouver location, so rentals outside of this area may require additional shipping time.
The Light & Motion Stella Single Point LED (spLED)s are a game changer for content creators everywhere. Featuring a cord-free, waterproof design and flicker-free light output that beautifully renders color and skin tone; Stella spLEDs set a new standard in broadcast and photo lighting.
Light & Motion has partnered with Elinchrom Skyport technology, Tenba Bags and Kupo Grip to create a series of all in one “Pro” kits to make it easier than ever to start saving time and money with the fast to set up, go-anywhere Stella spLEDs.
The Stella Pro 125 RF Kit features: one Stella 1000 spLED Light, one Stella 2000 spLED light, one Stella Pro 5000 RF spLED light and two KUPO “click” light stands; everything you need for a 3-point lighting setup. Also included is two Press On Fresnel 25° Lenses, two Press On Glo Bulb Diffusers, two Press On 3” Speed Ring Holder/Gel Holder, two Press on 50° Focus Optics, two Press on Barn Doors, one High Leverage Handle, one YS Mount Pro, one C-Stand Mount, two Cold Shoe Mounts, one Snap On Barn Doors for Stella 1000, one Snap On 25° Fresnel, three 1/4-20 Adaptor, one 6ft extension cord and the Elinchrom EL-Remote Control for Stella Pro all easily transported by a custom Tenba Rolling Grip Case or the Tenba BYOB/Packlite which is included inside the rolling case.
The Stella 1000/2000/5000 spLEDs feature Chip on Board (COB) Single Point Lighting Arrays that delivers the optical characteristics of a single-point light source reducing the multiple shadow effect that can be a problem with multi-dot panel style light sources.
The Stella Pro 5000 RF spLED light weighs only 2.5 pounds, while the 2000 weights 1.1 pounds and the 1000 only .6. All are daylight-balanced at 5,600K making them an ideal choice for location work, interviews and small sets where studio quality light in a highly portable form factor is important. Their wide, 120 degree beam that can be narrowed with the included modifiers and has been specifically designed to use a wide range of lighting modifiers to provide the perfect beam angle and lighting style. The power output of the light is dimmable either continuously or in steps and because of the fan-less design of the heat sink, they dead quiet for sound-sensitive locations.
Powered by a built-in Li-Ion battery that charges in 1.5 hour to 80% and in 2 hours to 100%; the Stella Pro 5000 RF spLED gives you a run time of 90 to 720 minutes depending on the power level selected. The Stella 1000 and 2000 both charge to 80% in 1 hour, 100% in 1.75 hours and give you run times of 90 to 715 minutes and 50 to 415 minutes respectively. You can also extend the run time for longer shoots by connecting it to Light & Motion’s external battery packs or any external battery source with a D-Tap Connection (D-Tap cable sold separately). Additionally, you can use main power anywhere in the world thanks to the inclusion of a multi-voltage AC power supply/charger.
Designed to handle even the most demanding shoots, the Stella's housings can withstand being dropped on concrete from a height of 3.3'; and with a water and dust resistance rating of IP68 they are also waterproof to depths of 328 feet.
Taking cord free operation to the next level, the Stella Pro 5000 RF integrates Elinchrom Skyport technology allowing long range and reliable wireless control for up to 20 lights from the included EL-Remote Control for Stella Pro. Please note remote control technology is only compatible with Stella Pro 5000 RF and Stella Pro 8000 RF models. (Stella Pro 8000 RF not included in this kit configuration)
All Stella spLED's reliability is tested and certified in accordance with the ANSI/NEMA FL-1 Standard. Light & Motion is the first in the industry to certify our lights in this way. Buy with confidence knowing that we deliver what we claim in precise detail about the lumen output, color temperature, CRI, TLCI, and FLUX rating.
- High output Chip on Board (COB) LED
- Intuitive three button interface provides fast, precise output control and navigates settings menu
- Broad range of mounting options and accessories including Profoto and Chimera adaptability
- OLED status display screen give accurate lumen output and battery status
- Runs off wall power or D-Tap, 12V, external battery kit or car charger
- Fast charge of 1.5 hr. to 80% and 2.0 hr. to full charge
- Certified performance (FL-1 standard)
- Durable rugged design for reliability
- Waterproof to 328 feet
Includes New Skyport Technology
- Built in EL-Skyport transceiver on the Stella Pro 5000 RF supports up to 10 frequency channels and 4 light groups
- Control 20+ lights with range up to 200 meters (outdoors) and 60 meters (indoors) with EL-Remote Control For Stella Pro (Included)
- Wireless firmware updates allow professionals to keep current with all future technology updates